Test and Measurement Forum

How to Save 4channels of Data from 2405A

Post any questions you may have about our current range of oscilloscopes

How to Save 4channels of Data from 2405A

Postby musicman » Wed Dec 28, 2016 7:43 pm

Does anyone have software to save all 4 channels of data from the 2405A scope, preferably in .CSV format, or even some guidance on how to do this?
musicman
Newbie
 
Posts: 0
Joined: Thu Sep 01, 2016 8:10 pm

Re: How to Save 4channels of Data from 2405A

Postby Martyn » Wed Dec 28, 2016 8:47 pm

If you are using PicoScope 6 software then use File->Save and change the file type to CSV

This is limited to 1000000 rows with the 6.11 release, but the limit has been removed in the recent 6.12 version.

Alternatively you can setup and capture data directly from within Excel, please contact support@picotech.com for the support files for your scope.
Martyn
Technical Support Manager
Martyn
Site Admin
Site Admin
 
Posts: 2686
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: How to Save 4channels of Data from 2405A

Postby musicman » Wed Dec 28, 2016 10:30 pm

Thank you. Just to clarify, are you saying that I do not need to manipulate any SDK files in order to obtain output data from the 4 channels on the 2405A and that all I need to do is to use the save function?
musicman
Newbie
 
Posts: 0
Joined: Thu Sep 01, 2016 8:10 pm

Re: How to Save 4channels of Data from 2405A

Postby Martyn » Thu Dec 29, 2016 9:53 am

File->Save would be the easiest and quickest method. Just setup the scope, capture the data on all four channels, then save it in csv format.
Martyn
Technical Support Manager
Martyn
Site Admin
Site Admin
 
Posts: 2686
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests