Picoscope 4824 Logic triger

Post any questions you may have about our current range of oscilloscopes
Post Reply
vesco
Newbie
Posts: 0
Joined: Tue Dec 20, 2016 2:25 pm

Picoscope 4824 Logic triger

Post by vesco » Tue Dec 20, 2016 2:33 pm

Hi,
When using the 8-channel scope (4824) I hopped I can trigger on the 8 channel simultaneously, using the advanced (Logic) trigger. But the scope software allows 4 channels max to be used. Can this be improved at some time?
My application requires finding pulse on any of 12 channels simultaneously.

Regards,
Veselin.

Martyn
Site Admin
Site Admin
Posts: 3345
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Picoscope 4824 Logic triger

Post by Martyn » Thu Dec 22, 2016 7:02 am

We have a request in for this feature, so please email support@picotech.com and we can add your details to this. There are no guarantees that it can, or will, be implemented as there may not be enough firmware real estate inside the device, we can only ask :)
Martyn
Technical Support Manager

Post Reply