Test and Measurement Forum

HVAC Monitoring

Which product is right for your exact requirements

HVAC Monitoring

Postby Tom Jones » Fri Aug 25, 2006 2:17 pm

Dear Sirs,

We are looking for sensors and software to monitor and graph the following:

Temperature oC in the area and temperature on coil and off coil
HumidityRH% room and on and off coil
Pressure in ductwork static and velocity in Pa from 50 pa to 500p
Airflow in duct and in room mtrs/sec and 3/mtrs/sec
And if possible with a USB connection for a laptop,

Best regards

Tom Jones
Sales Engineer
Tom Jones

Postby Sarah » Thu Aug 31, 2006 11:54 am

Hi Tom

Thank you for your post.

The temperature and humidity should not be a problem. What ranges do you intend to measure? Also what do you mean by on and off coil?

The other parameters could be measured by our loggers however you would need to source your own sensors for this. If you find sensors to measure them then I will be more than happy to advise as to their suitability and which loggers would be best.

Best Regards

Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests