Test and Measurement Forum

Resistance for the terminal block

Forum for discussing PicoLog

Resistance for the terminal block

Postby J Minns » Mon Aug 21, 2006 10:29 pm

I have an amplifier from a strain guage amplifier which gives a 10V output to the terminal block. How do I calculate the reistance needed in a Potential divider situation ao that the max Vin is 2.5V. I am referring to an ADC 11/12 USB device and associated terminal block.

I have DasyLab software, how can I input the ADC 11/12 into their software?

Thanks for any help
J Minns

Postby Michael » Wed Aug 23, 2006 8:03 am


I have attached the terminal board document used for calculating resistor values for potential dividers.

I believe that DasyLAB software will be able to access our devices directly from the dll files. You will need to consult the DasyLAB manual for confirmation.

Best regards,
Terminal Boards General.pdf
(1.02 MiB) Downloaded 347 times
(68.26 KiB) Downloaded 344 times
Michael - Tech Support
Pico Technology
Web Support Forum
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Return to PicoLog

Who is online

Users browsing this forum: No registered users and 1 guest