reading flow/ temperture/ and ph to a data logger

Which product is right for your exact requirements
Post Reply

reading flow/ temperture/ and ph to a data logger

Post by jpw » Fri Aug 11, 2006 1:53 pm

i have to measure flow temperture and ph from our effluent discharge,
i have all these three devices installed but for some unknown reason a coupling divice was not included to transmit this data to a computor to show live reading of all three .
do you have a data logger with a with a programe suitable for windows xp so i can read the measurments live and record every hour.


Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael » Mon Aug 14, 2006 9:11 am

Hello Jim,

Thank you for your post.

We may well have a suitable device for this. A lot will depend on your sensor outputs. If you can supply this information we will be able to help you further.

What we need:
Output variable-Volts, amps etc
Output range-10v, 4-20mA etc.
Sampling interval

Many thanks.

Best regards,
Michael - Tech Support
Pico Technology
Web Support Forum


measuring temperture , ph , and flow

Post by jpw » Tue Sep 12, 2006 4:37 pm

by any chance do you have a data logging device that will measure temperture , ph , and flow (via ultra sonic)

a logging unit supplied with all three measuring devices and suitable soft wear?


Post by Sarah » Wed Sep 13, 2006 12:20 pm


Thank you for your post.

Our DrDAQ logger will measure both temperature and pH and has a voltage input too so you could connect another sensor up to this. We do not sell sensors to measure flow but the DrDAQ may be able to support them if they have a suitable output.

Best Regards

Post Reply