Test and Measurement Forum

Matlab 2016a cannot find PS6402

Post your MATLAB discussions here

Matlab 2016a cannot find PS6402

Postby morelight » Thu Oct 27, 2016 1:37 pm

I have installed PicoSDK_64_10.6.10.22, and the PicoScope6 software.
The folders PicoSDK\MATLAB\ps6000\win64 with the thunk file and
PS Generic Instrument Driver...\code\ps6000\win64 and
and the PS Toolbox...\code is in the MATLAB path

but I cant connect to the oscilloscope... (it works perfectly fine in the PicoScope6 software)

This is the error I get when trying to run the streaming example:

Code: Select all
Copyright © 2014 - 2015 Pico Technology Ltd. All rights reserved.

PicoScope 6000 Series MATLAB Instrument Driver

Warning: Disconnect: No devices found.
Error using icdevice (line 313)
An error occurred while executing the driver create code.
Det går inte att hitta den angivna modulen.


If the error is not an instrument error, use MIDEDIT to inspect the driver.
Error in PS6000_ID_Streaming_Example (line 61)
ps6000DeviceObj = icdevice('picotech_ps6000_generic', ''); 
morelight
Newbie
 
Posts: 0
Joined: Thu Oct 27, 2016 9:27 am

Re: Matlab 2016a cannot find PS6402

Postby Hitesh » Thu Oct 27, 2016 2:32 pm

Hi Morelight,

If the PicoScope 6 software is running at the same time, please close it then try to connect to the device.

Otherwise, please e-mail support@picotech.com and we will provide you with some updated drivers which you can try.

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2058
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Matlab 2016a cannot find PS6402

Postby morelight » Fri Oct 28, 2016 7:01 am

Thanks, I know the software has to be closed... I've sent you an email now.
morelight
Newbie
 
Posts: 0
Joined: Thu Oct 27, 2016 9:27 am


Return to MATLAB

Who is online

Users browsing this forum: No registered users and 0 guests