Test and Measurement Forum

Pico 4424

Post your C and C++ discussions here

Pico 4424

Postby hamzeh » Thu Oct 13, 2016 2:16 am


I am new to Pico, I have Pico4424
I have installed it properly and I am able to open and close handel correctly.

I would like if you have any existing code in C that will read back data (i.e, setup one channel or multi channel, then set trigger, and set readback buffer and read back/view data)

Your input is highly appreciated.

Posts: 0
Joined: Thu Oct 13, 2016 2:10 am

Re: Pico 4424

Postby Martyn » Thu Oct 13, 2016 6:04 am

If you are using a WIndows O/S, and you have installed the SDK, the code example should be on your system, in c:\PicoSDK , and the include files will be located somewhere in the Program Files directory.

If using Linux, or you haven't installed the SDK, some sample code is attached.
(15.22 KiB) Downloaded 2 times
(22.03 KiB) Downloaded 4 times
(52.16 KiB) Downloaded 3 times
Technical Specialist
Site Admin
Site Admin
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to C and C++

Who is online

Users browsing this forum: No registered users and 0 guests