Zero line Jumps up and down during ramp test

Post any questions you may have about our current range of oscilloscopes
Post Reply
pico4425pico
Newbie
Posts: 0
Joined: Sun Sep 25, 2016 3:46 pm

Zero line Jumps up and down during ramp test

Post by pico4425pico » Sun Sep 25, 2016 3:52 pm

I am using a picoscope 4425 and my pico TA018 amp clamp at my fuse box on my car doing all coil ramp tests and I see my "Zero" line jumping up and down (with coil ramps on them). Can you give me a solution to this?
Thank you.... :|
Murle

Martyn
Site Admin
Site Admin
Posts: 3341
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Zero line Jumps up and down during ramp test

Post by Martyn » Tue Sep 27, 2016 12:59 pm

As this is an automotive related question, and you have already posted on that forum, please check for an answer there.
Martyn
Technical Support Manager

Post Reply