Empty exported CSV files....?

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
robertmark68
Newbie
Posts: 0
Joined: Mon Sep 19, 2016 7:02 pm

Empty exported CSV files....?

Post by robertmark68 » Mon Sep 19, 2016 7:09 pm

Hello

I have managed to save a couple of waveforms in the native PicoScope format. :roll:

I am trying to extract CSV files from these files and every time i try the csv files created are EMPTY.

Can you PLEASE assist me with this?

Robert

Martyn
Site Admin
Site Admin
Posts: 3372
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Empty exported CSV files....?

Post by Martyn » Tue Sep 20, 2016 6:05 am

Can you post them here and we can take a look.
Martyn
Technical Support Manager

robertmark68
Newbie
Posts: 0
Joined: Mon Sep 19, 2016 7:02 pm

Re: Empty exported CSV files....?

Post by robertmark68 » Tue Sep 20, 2016 10:56 am

Martyn wrote:Can you post them here and we can take a look.
ACMU.psdata
(24.08 KiB) Downloaded 170 times
LPTPAU.psdata
(22.2 KiB) Downloaded 175 times

Martyn
Site Admin
Site Admin
Posts: 3372
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Empty exported CSV files....?

Post by Martyn » Tue Sep 20, 2016 12:38 pm

Have you tried capturing a complete waveform, rather than a partial one, this may be the issue.
Martyn
Technical Support Manager

robertmark68
Newbie
Posts: 0
Joined: Mon Sep 19, 2016 7:02 pm

Re: Empty exported CSV files....?

Post by robertmark68 » Tue Sep 20, 2016 1:39 pm

Martyn wrote:Have you tried capturing a complete waveform, rather than a partial one, this may be the issue.
I am not at all sure what that means....

Can you elaborate?

R

Martyn
Site Admin
Site Admin
Posts: 3372
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Empty exported CSV files....?

Post by Martyn » Tue Sep 20, 2016 2:03 pm

Your trace stops half way across the screen, wait until it has finished a full screen, and see if you can save as CSV then.
Martyn
Technical Support Manager

robertmark68
Newbie
Posts: 0
Joined: Mon Sep 19, 2016 7:02 pm

Re: Empty exported CSV files....?

Post by robertmark68 » Tue Sep 20, 2016 2:19 pm

Martyn wrote:Your trace stops half way across the screen, wait until it has finished a full screen, and see if you can save as CSV then.

Martyn

This is saved data...I no longer have access to the equipment that was the source of this measurement.

These two files are all I have....I need CSVs of the data therein.

How can we make this happen?

R

Martyn
Site Admin
Site Admin
Posts: 3372
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Empty exported CSV files....?

Post by Martyn » Thu Sep 22, 2016 6:41 am

Right click on the display, and select Channels and then untick AMPS, and then you can export the data.

The AMPS maths channel references a channel that is not active so the software does not know what to do for the export.
Martyn
Technical Support Manager

Post Reply