how to record one signal from COM1 with signals from ADC11

Forum for discussing PicoLog
Post Reply
maverick
User
User
Posts: 4
Joined: Wed Jun 28, 2006 2:29 pm

how to record one signal from COM1 with signals from ADC11

Post by maverick »

Hi,

I need to integrate a digital signal from COM1 with three signals from ADC11-10, i.e., I need to record those 4 signals at the same time(one from COM1, three from ADC11-10). How it can be done? Could it be done with Picolog?

Thanks.

Best regards,
Maverick

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello,

PicoLog is not capable of reading signals direct from the COM port. This would have to be done with some kind of custom application. Integrating the ADC11 with this would be easy as we supply drivers for this unit already.

If you have any further questions, please let me know.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

maverick
User
User
Posts: 4
Joined: Wed Jun 28, 2006 2:29 pm

custom application to record data from COM1

Post by maverick »

Hello, Michael

Thank you for your answer. could you give some hints/details about the custom application? Is it possible that a Labview program can record data from ADC11 and COM1 at the same time? Do you have some similar examples that we can refer? Thanks.

Best regards,
Maverick

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello,

I am not sure if LabVIEW is capable of reading data direct from the COM port. You will have to check your LabVIEW documentation for this.

As for writing your own program, you can download the drivers and examples from our software download pages.

Please visit: www.picotech.com/software.html

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply