Test and Measurement Forum

adc 2xx linux driver problem

Post general discussions on using our drivers to write your own software here

adc 2xx linux driver problem

Postby steveo » Mon Jul 17, 2006 5:55 am

hi,

Two issues, first a problem .... then a request ...

Problem: The test software does not recognise the ADC.

I'm running a200lnx on my laptop - which has a SuSE 10.0 linux distribution on it. The parallel port base address in 0x378 (LPT2 i think) and I've set the port mode to be "normal" in the BIOS.

running a200lnx as root is fine, if I run strace on the process it spends a while mucking about with some libraries, then mmaps some memory, allocates a shared memory segment, attaches to it then just sleeps.

when I run the test software - not matter what LPT I give, 1,2 or 3, it simply cannot detect the ADC.

Any ideas?


Request:

I would like to sample a voltage continuously and it appears from the documentation that this "slow" mode is not available under linux. Is this still the case? Is there any chance that a slow mode enabled driver will be released in the coming months? - or any chance the driver source can be released under an academic (not for profit) licence (I work at a University)

I say this because this continuous sampling is vital to my application - And as my windows emulator (wine) seems to dislike all the .vxd and .sys drivers .... I may have to give Bill Gates yet more money.

Thanks all
steveo
Newbie
 
Posts: 1
Joined: Mon Jul 17, 2006 5:39 am

Postby Michael » Mon Jul 17, 2006 8:10 am

Hello,

We are unable to support use of our products under Linux. We do provide these drivers but we cannot offer any further development.

I am sorry we cannot help you.

Regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
Zen Master
Zen Master
 
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire


Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 1 guest