Test and Measurement Forum

psd -file format

Forum for discussing PicoScope (version 5)

psd -file format

Postby McLyde » Thu Jun 29, 2006 7:41 am

I've been trying to make a matlab-code that would read psd-files. I am having slight problems with the code and I came here to ask, if I have understood something wrong.
(I have a picoscope 3206 and the software version is 5.13.3) I use the save on trigger mode. I have also changed the SaveUncompressed flag to YES in the psw.ini. I have one single channel, that I use to collect 4002 datapoints with 10ns time resolution

The header is 8 bytes long. How many bytes are the "owner", "section type", "section number" and "number of parts"?

After the first 8 bytes, the next 32 bits (4 bytes) describe the size of part 1?

After part one, there should be a 32bit count that would describe the size of part 2. Part 2 is constructed of 16bit ADC-values.
The size of part 3 is found from the next 32 bits, and the 32bit time values can be found from there.

Have I understood this right or am I way off?
Active User
Active User
Posts: 7
Joined: Thu May 18, 2006 5:14 am
Location: Finland

Postby Michael » Thu Jun 29, 2006 8:44 am


The PSD file format is very complex. There are window size and positions that are stored as well as measurements and cursor positions.

I would suggest that you use the batch convert programm embedded in the psw32.exe file. Full information can be found in the help files.

This program will turn your psd files into csv files, making it easier to read by other applications.

Best regards,
Michael - Tech Support
Pico Technology
Web Support Forum
Zen Master
Zen Master
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Good luck

Postby tomford2 » Tue Jul 04, 2006 10:28 am

Check the forum post a while back with the URL about864. There's some C++ code that decodes the headers correctly. However, I couldn't get sensible data from the psd file using this code - the data seems to be an array of shorts but they don't correspond to the data readings!

How to use the batch convert

Postby samthetechie » Sun Apr 20, 2008 10:03 pm

The help documentation says:

psw -t run*.psd

I would like to point out that most XP users will find this code more useful:

cd c:/directory/where/your/code/is/

psw32.exe -t *.psd
Posts: 2
Joined: Sun Apr 20, 2008 9:56 pm

Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests