Test and Measurement Forum

PicoScope 6 Beta version Mac selecting channel in scope

Having problems ? let us know the details here

PicoScope 6 Beta version Mac selecting channel in scope

Postby ALHFR » Wed Aug 24, 2016 10:14 am

Hello,

I am using PicoScope 6 Beta version for Mac.
I have two channels A and B and I created 3 scopes : one for A, one for B and one for A and B. However I can't seem to be able to watch only A or only B in certain scope, it seems I can only watch A and B together. Is-it normal?

Regards,
Audrey
ALHFR
Newbie
 
Posts: 1
Joined: Wed Aug 24, 2016 10:11 am

Re: PicoScope 6 Beta version Mac selecting channel in scope

Postby Hitesh » Mon Sep 05, 2016 3:22 pm

Hi Audrey,

The feature to be able to display/hide channels has not been added to the Mac OS X/Linux versions of PicoScope.

I will report this to the Development Team, who are working towards feature parity with the Windows version.

If you have access to a Windows PC running the latest PicoScope 6.11 version you can save a settings file and load it on the Mac. I have attached a settings file which you can try.

3_scope_view_6_11.pssettings
Settings file with 3 Scope views
(3.71 KiB) Downloaded 15 times

Hope this helps,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2058
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests