Test and Measurement Forum

Second hand Picoscope supplied without a Parallel Cable

Forum for discussing PicoScope (version 5)

Second hand Picoscope supplied without a Parallel Cable

Postby Phil Winder » Wed Jun 14, 2006 6:09 pm

Hi, ive just purchased a second hand ADC-200 and it has come without a parallel cable. I have had a search around and found no mention of what sort of Parallel cable is being used. With the confusion of the USB-Parallel converter using non-standard wiring layouts, I thought Id better check before I start plugging random cables in.

Could you please provide a description/wiring diagram to the construction of a Picoscope Parallel cable?

I would prefer not to purchase another from yourselves since I have some spare parallel cables lying around.

Many thanks,

Phil Winder
Phil Winder
 

Postby alan » Wed Jun 14, 2006 6:35 pm

Hi,

The parallel cable is a D25 male to female. The pins are wired 1-1, 2-2, 3-3 etc. All pins are connected.

You can get the latest software from the web & hopefully you have the power supply - if not it needs between about 9V and 24V and the centre pin of the power connector is positive.

Regards
Alan
alan
Site Admin
Site Admin
 
Posts: 171
Joined: Thu May 25, 2006 8:02 am

Postby Guest » Wed Jun 14, 2006 7:25 pm

Excelent. Thanks, Its working fine.

Oh, and thanks for keeping the old devices in the new software!

Phil Winder
Guest
 


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests