Multi channel loging

Which product is right for your exact requirements
Post Reply
Malcolm Edwards

Multi channel loging

Post by Malcolm Edwards »

Dear Sir,
I want to log 27 k typr thermocouple inputs,
0 - 10 vdc analoue input from a thermal camera,
Up to 10 digital inputs.

Can you recommend products required for loging via a laptop running windows 95.

Regards
Malcolm Edwards (malcolm.edwards@saint-gobain.com)

User avatar
matthew
Advanced User
Advanced User
Posts: 109
Joined: Wed Sep 25, 2002 9:35 am
Location: Cambridgeshire, UK

Post by matthew »

Hi Malcolm,

The following would be a viable solution for this application:

4 x TC-08 (8 channel thermocouple converters)
1 x ADC-11/12 (11 channel 0-2.5V converter)

The laptop will most likely have a parallel port connector for the ADC-11, however, it will not have enough serial ports for the TC-08s (they require one each). We can supply USB to serial port converters for any additional ports you require (I believe you need Win98 to use USB though).

Notice that the ADC-11 only has 0-2.5V inputs, so if you require 0-10V you will need to use a potential divider which you can buy from any electronics component vendor (or make yourself if you know how).
The ADC-11 will measure the high and low of digital signals against time, but it will not decode the signals.

I hope this helps.

Best Regards,
Matt Everett

Pico Software Engineer

Post Reply