Test and Measurement Forum

PICO 3204MSO Using Digital Inputs for Serial Decoding

Having problems ? let us know the details here

PICO 3204MSO Using Digital Inputs for Serial Decoding

Postby CarlosTheEngineer » Mon Jul 04, 2016 11:05 am

Hi All
This is my first real dabble with PICO-SCOPE.. I am interested in monitoring/decoding a SPI Bus, I know the signal integrity is good, so I would like to use the Digital Inputs. Is this possible, as every time I set it up, the Serial Decoding Window is empty.
Any help would be greatly Appreciated :?
Setup:
MI = SPI
Data = D1
Clock = D0
Chip Select = D3
Clock Edge = Rising
Chip Select State = Low
Bit Order = MSB

MO = SPI
Clock = DO
Data = D2
Chip Select = D3

Display packets in: Graph = Tick (Hex)
Display packets in: Table = Tick (Hex)
CarlosTheEngineer
User
User
 
Posts: 3
Joined: Mon Jul 04, 2016 10:30 am

Re: PICO 3204MSO Using Digital Inputs for Serial Decoding

Postby Martyn » Mon Jul 11, 2016 9:55 am

Can you post a psdata file and we can take a look to see what is going wrong.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests