Test and Measurement Forum

Picolog for Linux

Forum for discussing PicoLog

Picolog for Linux

Postby bruce » Wed Jun 01, 2016 4:29 am

Hi

I would like to know if there is a Debian Linux version of Picolog for the 1216 logger. I cannot
find any specific reference to this, I have only found Linux for Picoscope.

Thank you
Bruce
bruce
Newbie
 
Posts: 0
Joined: Wed Jun 01, 2016 4:13 am

Re: Picolog for Linux

Postby Martyn » Wed Jun 01, 2016 10:34 am

We do not have a Linux version of PicoLog, and it is not on the development plans, we would want to rewrite the software before we even considered it.

There are Linux drivers for the PicoLog 1216, with some example code in C, if that helps.
Martyn
Technical Support Manager
Martyn
Site Admin
Site Admin
 
Posts: 2819
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Picolog for Linux

Postby maru » Wed Nov 29, 2017 7:40 am

Hi Martyn

first, sorry for my bad english, i hope you understand me. I buy a Picolog 1216 to track an vibration-signal with a Raspberry Pi 3.

I Need 500 messure-points per second. i Need this Data in a Waveform to make some math with this...

every second i want Trigger the 1216 to send a Waveform to the Pi. is this impossible?

now my questions: i install the driver of the device and i only can find the USBTEST (it works well, all ok i think).

where are the some examples? i cant find.Have you any documetation for programming the 1216?

thank you very much!

greeting from switzerland

Maru
maru
Newbie
 
Posts: 0
Joined: Wed Nov 29, 2017 7:25 am

Re: Picolog for Linux

Postby Martyn » Wed Nov 29, 2017 10:02 am

That sounds fine.

Please check our examples on GitHub

You can download the Programmer's Manual for the PicoLog 100 series here
Martyn
Technical Support Manager
Martyn
Site Admin
Site Admin
 
Posts: 2819
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to PicoLog

Who is online

Users browsing this forum: No registered users and 0 guests