PicoScope 7 Software
Available on Windows, Mac and Linux
How to save serial decoding settings
How to save serial decoding settings
I mostly work with serial communications, both UART and RS232 at various data rates.
The ability to set up decoders to show the value of each byte is great, saves me a lot of time.
BUT I cannot find a way of saving the decoders I have created, they get lost every time I close PicoLog.
I'm using a Pico 3204 (old but good) with software 6.11.12.1692
The ability to set up decoders to show the value of each byte is great, saves me a lot of time.
BUT I cannot find a way of saving the decoders I have created, they get lost every time I close PicoLog.
I'm using a Pico 3204 (old but good) with software 6.11.12.1692
Re: How to save serial decoding settings
What I do is save the data including decoded data and right decoder settings.
Then when I want to use the decoder settings again I open the .psdata file with I had saved before.
Then start collecting data and all settings are OK.
There should be a better way of doing this but this is an easy way for me
Benno
Then when I want to use the decoder settings again I open the .psdata file with I had saved before.
Then start collecting data and all settings are OK.
There should be a better way of doing this but this is an easy way for me
Benno