Error running Generic Driver Block

Post your MATLAB discussions here
Post Reply
Posts: 0
Joined: Thu Apr 28, 2016 1:32 pm

Error running Generic Driver Block

Post by mcouplet » Fri Apr 29, 2016 6:48 pm

I'm trying to connect to my PicoScope 2204A using MATLAB. However, when I try running "PS2000A_IC_Generic_Driver_Block", I get the following error:

Code: Select all

Error using instrument/delete (line 82)
Operation failed: An error occurred while executing the driver disconnect code.
Struct contents reference from a non-struct array object.
If this error is not an instrument error, use MIDEDIT to inspect the driver.

Error in icdevice (line 308)

Error in PS2000A_IC_Generic_Driver_Block (line 7)
ps2000aDeviceObj = icdevice('picotech_ps2000a_generic.mdd', '');
What does that mean? I'm running Win7 64bit and MATLAB 64bit.
Thanks in advance!

Site Admin
Site Admin
Posts: 2846
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Error running Generic Driver Block

Post by Hitesh » Tue May 03, 2016 11:14 am

Hi mcouplet,

The PicoScope 2204A requires the PicoScope 2000 Series Instrument Driver.

Please note that Pico Technology is not responsible for the content of third party sites.


Technical Support Engineer

Post Reply