Save measures in more than 32 files

Post any questions you may have about our current range of oscilloscopes
Post Reply
mcouplet
Newbie
Posts: 0
Joined: Thu Apr 28, 2016 1:32 pm

Save measures in more than 32 files

Post by mcouplet » Fri Apr 29, 2016 11:30 am

Hi,
I'm using a PicoScope 2204A. I would like to save measures in multiple files (1 file/"screen") in the .mat format. However, I can't save more than 32 files, due to the Picoscope's limited memory apparently. Is there any way I can save more files (the measures have to be continuous of course)?
I hope I explained my problem clearly enough...
Thanks in advance!
mcouplet

Hitesh
Site Admin
Site Admin
Posts: 2793
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Save measures in more than 32 files

Post by Hitesh » Tue May 03, 2016 4:27 pm

Hi mcouplet,

To increase the number of waveforms that can be collected with the PicoScope 2204A, click Tools -> Preferences, then in the General tab change the number of Maximum Waveforms (up to a maximum of 10000).

Regards,
Hitesh

Technical Support Engineer

mcouplet
Newbie
Posts: 0
Joined: Thu Apr 28, 2016 1:32 pm

Re: Save measures in more than 32 files

Post by mcouplet » Wed May 04, 2016 6:16 am

Great, thanks a lot!

Post Reply