Test and Measurement Forum

PSD format with 4 channel scope

Forum for discussing PicoScope (version 5)

PSD format with 4 channel scope

Postby Dave » Tue Apr 11, 2006 4:08 am

I am attempting to read *.PSD files from a 3424. What is the file structure? What section type is used? How are the parts arranged? How may bytes in ADC and Time?
Thanks for the help
Dave
 

Postby Michael » Tue Apr 11, 2006 8:39 am

Hello,

The data within the .psd file is very complex. The best way to read data from a psd file is to use the batch transpose programme embedded within the software.

Instructions can be found in the help files.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
Zen Master
Zen Master
 
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Reading PSD files

Postby dcamm » Tue Apr 11, 2006 3:45 pm

I would really prefer to read the PSD files directly into my applicataion. Would it be possible to get a format definition?
dcamm
Newbie
 
Posts: 1
Joined: Tue Apr 11, 2006 3:40 pm

Postby Michael » Tue Apr 18, 2006 2:22 pm

Hello,

We cannot provide this information. You will have to trasnlate the file using the batch transfer method indicated in the manual.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
Zen Master
Zen Master
 
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

psd Formats

Postby QEGI » Sat Aug 05, 2006 2:44 am

To Technical Support---
What an unacceptable answer! You are on the verge of a good product here, and all I see in your answers is that you cannot help. Publishing a file format is a way to get users to expand your produts markets. How disappointing. :x
QEGI
 

Postby Sarah » Tue Aug 08, 2006 1:40 pm

Hi

I am sorry that we have been unable to help you in this, unfortunately there is some information relating to our software that we are unable to release.

If you wish, you can save the files in a different file format by opening them in Picoscope and then resaving them. A text file for example will then be very easy to read in. As Michael has mentioned, there is a batch convert to save time with converting to text. If you save more files in future, you can always save them directly to these other formats instead of (or as well as) psd files.

Best Regards
Sarah
 


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests