installing and using DrDaq under linux

Post your Linux discussions here
Post Reply

installing and using DrDaq under linux

Post by masterman » Thu Apr 06, 2006 2:21 pm

Hi at all,

I have a DrDaq card, and I have try to instll the driver on the:

- Debina Sarge 3.1 with Kernel 2.4.25 -> Insuccess

- Debian Sarge 3.1 with Kernel -> success

- Mandrake 10.1 with Kernel -> success

- Fedora Core 2 with Kernel 2.6.5 -> Insuccess

When I succesfully install the driver, I command with success the Led and the Voltage Output; but I don't read the sensor input values.

There is a particular setting??

The version of linux is not corrected??

The kernel version is not corrected??

Thanks in advance.



Post by Sarah » Fri Apr 07, 2006 9:51 am


Thank you for your post.

Unfortunately as the person who wrote our Linux drivers is no longer with the company we are now unable to support them. I believe the drivers were developed on RedHat 6 and so this may limit them in some ways.

Best Regards


DrDAQ Application Project

Post by jem » Sat Dec 09, 2006 11:49 am


For those that have interest in use DrDAQ over Linux, we developed a open source programa that can be found in sourcefroge site named drdaq.


Zé Eduardo

Post Reply