Test and Measurement Forum

ETS and USB interface.

Forum for discussing PicoScope (version 5)

ETS and USB interface.

Postby jswanson » Thu Apr 06, 2006 8:19 am

Hi,

I use an ADC212/50 with a USB adapter. I can't get ETS to work with the USB (although it does work with the parallel when available). I reported this problem 2 years ago (Problem 8657) and was told it was a problem with the USB driver and 'The problem has been documented in both our bug list and Problem report system.' Is this ever going to be fixed? I have tried the latest software, bit still have the problem.

Jeremy.
jswanson
Active User
Active User
 
Posts: 14
Joined: Wed Apr 05, 2006 8:07 pm

Postby Sarah » Fri Apr 07, 2006 10:10 am

Hi Jeremy

Thank you for your post.

I have tried this out with the latest software and can see no problem. Make sure that you have completely uninstalled the old software and then reinstall the new software to be sure that you are using all the new files.

Best Regards
Sarah
 


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests