Test and Measurement Forum

Measurement Reading by SDK

Post your C and C++ discussions here

Measurement Reading by SDK

Postby iscool2@gmail.com » Mon Mar 21, 2016 12:44 pm

I'm an C++ programmer.
How can I read my measurement items in my application with your SDK?
Actually, I already ask this to your web, but I can't found my post.
FYI, I attach an capture image.
Thanks.
Attachments
capture.png
Measurement Item to Read with SDK
iscool2@gmail.com
Newbie
 
Posts: 0
Joined: Mon Mar 21, 2016 11:48 am

Re: Measurement Reading by SDK

Postby Hitesh » Tue Mar 22, 2016 2:15 pm

Hi,

I have responded via your original thread (your post had not been approved immediately).

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2063
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Measurement Reading by SDK

Postby iscool2@gmail.com » Tue Mar 22, 2016 3:06 pm

To save measurement data to the file, I pressed stop button and run the following script at the command window with admin previlage.

"Picoscope.com /a Measurements.CSV? >> mydata.csv"
I tried above and then a mydata.csv file is generated. yeah!
I open it Excel, but that has no effective information.
Why?
FYI, I attached two pictures.
Thanks,

YoungTaek
Attachments
report3.png
report3.png (4.17 KiB) Viewed 997 times
report2.png
iscool2@gmail.com
Newbie
 
Posts: 0
Joined: Mon Mar 21, 2016 11:48 am

Re: Measurement Reading by SDK

Postby Hitesh » Tue Mar 22, 2016 5:12 pm

Hi,

Please try the function with the PicoScope software running.

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2063
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to C and C++

Who is online

Users browsing this forum: No registered users and 0 guests