Test and Measurement Forum

Using Serial and USB TC-08s

Having problems ? let us know the details here

Using Serial and USB TC-08s

Postby kmaccabe » Mon Feb 27, 2006 9:15 am

I need 16 channels of measurement so I am trying to perform a test using both the USB and Serial TC-08s. I have installed the software for the USB but am having problems using the Serial TC-08 as the driver is not found.

Is it possible to use these two different types of TC-08 in the same test?

If so, how do I get around the driver problem?
kmaccabe
 

Serial Driver

Postby kmaccabe » Mon Feb 27, 2006 10:18 am

I have also removed the software completely and re-installed just the serial version and the driver V2.6 is still not found when I attempt to edit the channel information in the recorder settings.
kmaccabe
 

solved

Postby kmaccabe » Mon Feb 27, 2006 12:27 pm

Solved the problem. I had a duff serial cable. :oops:
kmaccabe
 

Adding a USB TC-08 to a well working serial TC-08

Postby guest » Tue Mar 28, 2006 4:22 am

Hi, We have used a serial TC-08 for years with good results. Friday we recieved a new USB TC-08. Two different computers recognise new hardware but cannot find drivers on the install CD or on the net. Is the top center LED supposed to occasionally light? Other USB devices work well in the same ports.
Thanks Jerry
guest
 

Adding a USB TC-08 to a well working serial TC-08

Postby Jerry » Fri Mar 31, 2006 4:33 pm

Problem discovered,
When downloading the software I neglected to check the box "use multiple devices" and therefore the software had only the serial driver. Jerry
Jerry
Newbie
 
Posts: 1
Joined: Tue Mar 28, 2006 3:56 am


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests