Problem with AC/DC Switch ADC200

Post any questions about our parallel port products
Post Reply
Guest

Problem with AC/DC Switch ADC200

Post by Guest » Fri Feb 24, 2006 5:05 am

Hi, I have used ADC200 for a while, recently, I have a problem with AC/DC switch, the AC/DC switch disappears from the menu bar. So, I
can not switch between AC/DC mode. The machine seem to stuck on
AC mode only.

Information from the Help|About dialog is as follows

Release 5.05.1 - 32 bit
ADC200 Driver V2.05
ADC200-20 V5 on LPT1
Batch ?????
Cal Date
PICO.VXD V1.2

I have served in the web board and found that some people had the same problem, and the machine need a recalibration. By the way,
I am in THAILAND. Is there your reprensentative in THAILAND? I have
bougth the machine from JAPAN


Thanks

 

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael » Fri Feb 24, 2006 9:44 am

Hello,

Your ADC2xx has lost its calibration information.

You will need to return the unit to us for reprogramming.

Please use your local distributor or use the distributor that originally sold the unit to you.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply