USB TC08 instability

Post any questions you may have about our current range of USB data loggers
Post Reply
Michel

USB TC08 instability

Post by Michel » Wed Feb 15, 2006 11:10 pm

I have a problem with my USB TC08: sometimes, at some or all sensors, it gives the wrong temperature (t-type sensor), typical 7 degrees lower than the actual temperature. This phenomenom occurs quite randomly: it can happen once and that be alright for days and then stick there no matter how many times you restart the computer.
I use the TC08 in combination with another usb datalogger (dataq) and a balance connected to the serial port. I use a similar combination on another PC, only with a serial TC08s, and I have never seen the problem there.
Has anyone seen similar behaviour and above all, who knows how to fix it?

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael » Wed Feb 22, 2006 11:06 am

Hello,

This problem is too abstract to pinpoint. If you can narrow down the criteria, we may be able to find a solution top this problem.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply