Substract channels PicoLog 1216

Post general discussions on using our drivers to write your own software here
Post Reply
TechLogger
Newbie
Posts: 0
Joined: Tue Feb 09, 2016 3:46 pm

Substract channels PicoLog 1216

Post by TechLogger » Tue Feb 09, 2016 3:49 pm

Hi all,

Is it possible with a PicoLog 1216 to substract channels from each other?
I would like to measure current by measuring the voltage drop across a resistor.
Top
Martyn
Site Admin
Site Admin
Posts: 3723
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Substract channels PicoLog 1216

Post by Martyn » Wed Feb 10, 2016 9:47 am

Both the PicoLog and PicoScope software have the ability to do this, but you must make sure that the voltages are within the specification of the device.
Martyn
Technical Support Manager
Top
TechLogger
Newbie
Posts: 0
Joined: Tue Feb 09, 2016 3:46 pm

Re: Substract channels PicoLog 1216

Post by TechLogger » Mon Feb 15, 2016 7:21 am

Thank you Martyn.
I found the functionality, thank you!
Top
Post Reply

Return to “General Software Discussions”