Test and Measurement Forum

Load .pssettings into c# application

Post your .Net discussions here

Load .pssettings into c# application

Postby Jorne » Thu Feb 04, 2016 3:58 pm


Is it possible to load .pssettings which you have previously saved with the picoscope 6 software into your own written c# application?
So your c# application loads the right pico settings.

if possible do you have a sample code or an idea in which way I have to search for the solution?

i'm using a picoscope 4824.

Thanks in advance.
Posts: 0
Joined: Thu Feb 04, 2016 3:49 pm

Re: Load .pssettings into c# application

Postby Hitesh » Fri Feb 05, 2016 9:37 am

Hi Jorne,

Unfortunately, it is not possible to load a .pssettings file into a C# application using the SDK as it is proprietary information.

I would suggest noting your settings and then mapping them to a configuration file (e.g. an xml file) that your application can load in.


Technical Specialist
Pico Technology
Site Admin
Site Admin
Posts: 2032
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Load .pssettings into c# application

Postby Anthony75france » Fri Feb 19, 2016 12:19 pm

Hi Jorne,

check this thread:

to have different configurations, I am using different copies of the directory:
C:\Users\%USER%\AppData\Local\Pico Technology\64358d19-ef91-48bb-9ae0-3b4689d44d99

This might come handy.

Posts: 2
Joined: Mon Feb 08, 2016 8:43 am

Return to .Net Languages (C#, VB.Net, .)

Who is online

Users browsing this forum: No registered users and 1 guest