PS3206: using signal generator while running PicoLog?

Forum for discussing PicoLog
Post Reply
feng_lin78
User
User
Posts: 7
Joined: Wed Aug 10, 2005 2:21 pm

PS3206: using signal generator while running PicoLog?

Post by feng_lin78 »

I have a PS3206. I'm using PicoLog block mode to record some fast changing sigals. Meanwhile, I need a fixed frequency signal (~10KHz, 5V square) for other purposes. The signal generator under PicoScope served well for that, -i.e. I can trace the generated signals on ChA. However, PicoLog can't be open at the same time :!:

Is there a way that I can use the signal generator while recording from PicoLog :?: There seems no controls for this in PicoLog window :(

Regards,
Feng

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello Feng,

The signal generator is not available in PicoLog.

Try using the save on trigger function in PicoScope.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply