Test and Measurement Forum

Automotive diagnostic software

Which product is right for your exact requirements

Automotive diagnostic software

Postby Martin » Wed Feb 01, 2006 8:47 pm

Hi.
We are looking for a laptop scope that can measure signals from engine managmenbt systems. This product seems to be the right choice.
However we need too, for example, measure the coolant temperature sensor over a period of time, say 500 seconds. The question is, will Automotive diagnostic software achieve this or do we need a dedicated data logger?
Regards
Martin
Martin
 

CTS

Postby Autonerdz » Thu Feb 02, 2006 5:02 am

Hi Martin,

Yes.

With the 3000 series automotive scopes, you can select 50 seconds per division. This Will give you a 500 second screen time. If using one channel, that would maintain a sample rate of 610 Hz with a sample about every 1.6ms. There is a software selectable low pass filter to help keep the high frequency noise out of the signal.
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America
User avatar
Autonerdz
Guru
Guru
 
Posts: 141
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Postby ricardo » Fri Feb 03, 2006 1:21 pm

Hi Martin,

You'll find some examples of CTS waveforms on our website,

http://www.picotech.com/auto/waveforms/coolant.html

Best regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator
User avatar
ricardo
Guru
Guru
 
Posts: 71
Joined: Wed May 07, 2003 9:43 am


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 2 guests