Forum for discussing PicoLog
orbik
User
Posts: 3 Joined: Fri Dec 02, 2005 9:04 am
Post
by orbik » Wed Dec 07, 2005 12:13 pm
Hi im haveing a problem with the data logging on the TC-08 serial
When the first measurement is recorded (for arguments sake every 30 seconds)
The next record at 30secs is the same as 0sec first record bar a few .xxC
so it goes like this
0. 21.32C
30. 21.56C
60. ******
After the first 2 readings its fine
Even if a heat the thermocouple very fast after the initial start temp the second reading is 'out'
Can anyone shed some light to why it does this please?
Thanks
Alex
Michael
Advanced User
Posts: 656 Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire
Post
by Michael » Fri Dec 09, 2005 9:42 am
Hello Alex,
I have replied to you via email.
Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
orbik
User
Posts: 3 Joined: Fri Dec 02, 2005 9:04 am
Post
by orbik » Fri Dec 09, 2005 10:09 am
Cheers Michael, But nothing has come through yet. Could you resend again please.
Try this email 'TECHNICAL@Orbik.co.uk ' please if you are not already.
Thanks mate
Alex
orbik
User
Posts: 3 Joined: Fri Dec 02, 2005 9:04 am
Post
by orbik » Tue Dec 13, 2005 9:41 am
Can some one please get back to me with an update on the problem i am encountering thanks . This is the last email i have had.
Hello,
This anomoly appears to be cold junction compensation set up. I will look into further for you.
Best regards,
Michael - Tech Support
dated 8/12/2005
Thanks kindly
Alex
Guest
Post
by Guest » Fri Dec 16, 2005 2:24 pm
Hello can some one at Pico tech support please let me no what has been done to figure out the issue im having
I have had no responce not even a 'we are working on it'
If you can not solve the issue an email or PM would be most greatfull.
Alex
/feeling ignored
Michael
Advanced User
Posts: 656 Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire
Post
by Michael » Fri Dec 16, 2005 3:44 pm
Hello,
We are looking into this but have not been able to reproduce your problem.
This could be down to the log file setup. Please send us your *.plw file with the mentioned anomoly and recorder.pls file from your .../Pico/ directory.
This will help us to identify your particular problem.
Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
Guest
Post
by Guest » Mon Dec 19, 2005 4:09 pm
I have just sent the .pwl file and the recorder file as requested.
Alex
Michael
Advanced User
Posts: 656 Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire
Post
by Michael » Mon Dec 19, 2005 4:12 pm
Hello,
I will review the files and get back to you.
Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum