Input Channels

Post any questions about our serial port products
Post Reply

Input Channels

Post by ElaineC » Tue Nov 22, 2005 10:49 am

I'm using a ADC-16 with a terminal block. When I come to set up the PicoLog setting on 7 input channels are available. How do I get all 8 input channels available?


Post by Sarah » Tue Nov 22, 2005 1:11 pm

Hi Elaine

I believe this is a slight error in the software. Select Channel 7 and hit the down key on the keyboard, this should then revel channel 8.

Let me know how you get on with this.

Best Regards

Post Reply