pressure sensor display

Which product is right for your exact requirements
Post Reply

pressure sensor display

Post by » Fri Nov 11, 2005 12:14 pm


I am interested in setting up someting to measure pressure on my laptop or PC. I have the following pressure transdusers to choose from: 0 - 10V or 4 - 20 mA to measure 0 - 600 bar.
I would like to have digits as well as a graph displayed.
Which sensor should used - Volt or mA?
Further, whitch data loger / software; for 1 channel application or
for up to 4 channel applications

How can I convert a 0 -10V or a 4- 20mA output from a pressure transduser to pressure units ( Bar , Kpa , Psi ).
Thank you in advance for answering these questions for me.

Kind regards,

Leopold M.

Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael » Mon Nov 14, 2005 10:28 am


Either way would suffice for outputs. Our USB ADC20 High Resolution Data Logger may be a suitable product if you are looking for a data logger. The PS 2202 is another possibility if you are looking for an oscilloscope and data logger.

ADC20 20 bit resolution, 8 channels(4 differential)
PS2202 8 bit resolution, 2 channel

Best regards,
Michael - Tech Support
Pico Technology
Web Support Forum


pressure replay

Post by mohamed » Sat Mar 18, 2006 7:20 pm


I'm mohamed ali
I wase interrested in thes connections in my project
I can only answer you on the transformation process
it can be done by calibrating your pressure transduser by aknown
pressure value from avessel for example,and observing the value of the
electrical signal from the transduser

Post Reply