Test and Measurement Forum

Suggest USB to CAT5 Adaptor

Having problems ? let us know the details here

Suggest USB to CAT5 Adaptor

Postby mikeblack » Wed Oct 14, 2015 10:36 pm

Hi

We are looking at using two Pico 4824's in a remote location.

We would like to use a Tripp-Lite USB to CAT5 extender hub so we can run the pico's from a distance.

Our efforts with the Tripp-Lite USB2.0 over CAT5 extender hub (B203 series) do not work. We see the pico's in the device manager but we cannot connect either through API or with the software.

Is there a recommended solution to allow us to communicate at range via CAT5 or other wired means?

Best wishes

Mike Black
mikeblack
Newbie
 
Posts: 0
Joined: Wed Oct 14, 2015 10:25 pm

Re: Suggest USB to CAT5 Adaptor

Postby AndrewA » Fri Oct 16, 2015 10:22 am

Hi Mike,

Please see this post-
topic10103.html?hilit=iogear#p43651

We have tested this device over both Wifi and ethernet connections.
See the attached setup instructions.
Attachments
Set_up_the_IOGEAR_GUWIP204.pdf
Set_up_the_IOGEAR_GUWIP204
(357.96 KiB) Downloaded 72 times
Regards Andrew
Technical Specialist
AndrewA
Zen Master
Zen Master
 
Posts: 178
Joined: Tue Oct 21, 2014 3:07 pm


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests