About data reduction to just the statistics of interest

Which product is right for your exact requirements
Post Reply
bittware
Newbie
Posts: 1
Joined: Thu Jan 08, 2015 2:31 pm

About data reduction to just the statistics of interest

Post by bittware » Tue Oct 06, 2015 12:47 am

Hi,
I'd like to capture the integral value of a fast pulse (5us width) in real time with min. time interval of 2ms.
For PC can not process the integration in real time, I wish Picoscope could execute the math function on-the-fly and just give PC the end result.
I checked Picoscope programming guide and found the downsampling mode, but without integral value.
So my thoughts are:
1. In traditional scope, there is a tpye of ''area'' measurement. Is there counterpart in Picoscope? If yes, can I regard it as real time processing result and just take this single integration result value out when scope is triggerred?
2. Can I use certain math function to achieve my goal?

Hope to get your advice on this. Thanks in advance.

Martyn
Site Admin
Site Admin
Posts: 3333
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: About data reduction to just the statistics of interest

Post by Martyn » Fri Oct 09, 2015 8:04 am

There is an integral maths channel which may be what you are looking for. Tools->Maths Channels to launch the Maths Channel Dialog, and then Create->Next->Advanced where you will find the Integral function.
Martyn
Technical Support Manager

Post Reply