3 phase load monitoring

Which product is right for your exact requirements
Post Reply
guest

3 phase load monitoring

Post by guest »

Any advice would be gratefully appreciated.

I am working on a project that requires approximately 30 supplies to be monitored, measuring current, voltage, power factor, kw and kva, current would be of the order of 10-400A, voltage 230/415

I would need a 4 channel unit per supply, for 3 phase supplies.

The data aquired would need to be available for recording and displaying on a pc, ideally all monitors would share a bus connection.

What kit to specify, ct's etc


many thanks

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

You would not be able to measure energy consumption directly with our software. If you would like to discuss your application with further detail, please contact us direct at: support@picotech.com or call +44(0)1840 396395

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply