4423 stopped working

Which product is right for your exact requirements
Post Reply
rickadoe
Newbie
Posts: 0
Joined: Thu Oct 01, 2015 2:27 am

4423 stopped working

Post by rickadoe »

Hello All! looking for help/advice. We here at the college have (2) 4423 scopes. We use them for our automotive students. One just stopped working. We plug it into usb and a spike notification pops up. Anyone ever experience this? if its FUBAR, we would be looking for a 2 Ch. replacement. Suggestions, thoughts, ideas...Thanks :D

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 4423 stopped working

Post by Martyn »

It sounds as if the scope may be damaged. Please contact support@picotech.com , giving details of the problem, and they will talk you through the steps to hopefully get it working again.
Martyn
Technical Support Manager

rickadoe
Newbie
Posts: 0
Joined: Thu Oct 01, 2015 2:27 am

Re: 4423 stopped working

Post by rickadoe »

thanks. Sorry about putting question here, I didn't know there was a separate location for pico automotive.
If you can move to appropriate thread that would be awesome sauce!
-Rich

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 4423 stopped working

Post by Martyn »

You will need to register on the other forum, they are independent of each other so we can't copy posts across.

When you have a login on the auto forum you will also be able to use the same credentials to access the searchable online automotive waveform database from within the software. This is being populated with known good, and bad, waveforms from tests carried out by users all over the world.
Martyn
Technical Support Manager

Post Reply