PicoScope 7 Software
Available on Windows, Mac and Linux
Trigger with 2 digital signals
Trigger with 2 digital signals
I like to have a trigger combinating 2 digital signal (d0 or d1) and trigger when this combinated signal is "0" for more than x mseconds.
Is it possibile with the current sw version? I'm looking for this scope but I only found in separate way:
1) create a group with 2 signal
2) activation with level dropout
but I'm not able to combine them.
Can you help me? Thanks
Is it possibile with the current sw version? I'm looking for this scope but I only found in separate way:
1) create a group with 2 signal
2) activation with level dropout
but I'm not able to combine them.
Can you help me? Thanks
Re: Trigger with 2 digital signals
This mode of triggering is not possible with the software at the present time. Sorry.
Martyn
Technical Support Manager
Technical Support Manager
Re: Trigger with 2 digital signals
You can create an OR port (diodes or 74HC32 or 74HC02) and feed the output of this to D3.
Then do the triggering on D3
Benno
Then do the triggering on D3
Benno