Test and Measurement Forum

Trigger with 2 digital signals

Forum for discussing PicoScope version 6 (non-automotive version)

Trigger with 2 digital signals

Postby cacace » Thu Sep 17, 2015 1:56 pm

I like to have a trigger combinating 2 digital signal (d0 or d1) and trigger when this combinated signal is "0" for more than x mseconds.
Is it possibile with the current sw version? I'm looking for this scope but I only found in separate way:
1) create a group with 2 signal
2) activation with level dropout
but I'm not able to combine them.
Can you help me? Thanks
Posts: 0
Joined: Thu Sep 17, 2015 1:45 pm

Re: Trigger with 2 digital signals

Postby Martyn » Tue Sep 22, 2015 7:19 am

This mode of triggering is not possible with the software at the present time. Sorry.
Technical Specialist
Site Admin
Site Admin
Posts: 2314
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Trigger with 2 digital signals

Postby bennog » Tue Sep 22, 2015 1:27 pm

You can create an OR port (diodes or 74HC32 or 74HC02) and feed the output of this to D3.
Then do the triggering on D3

Posts: 79
Joined: Mon Nov 26, 2012 9:16 am

Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests