Test and Measurement Forum

System Crash when using ADC40 with usb adaptor

Post general discussions on using our drivers to write your own software here

System Crash when using ADC40 with usb adaptor

Postby Oliver Daniell » Wed Oct 05, 2005 1:34 pm

I have recently written some software to read data from the ADC-40. When the ADC40 is running without any voltage input i get a system crash with the following error when the computer restarts.

BCCode : 10000050 BCP1 : FEF69800 BCP2 : 00000000 BCP3 : AACD55A3
BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

The problem seems to be random however as yet it has not occured when using the PicoScope software.

The problem only occurs when i am not inputting any voltage to the ADC40. Another side effect is that when there is no voltage input to the ADC40 the reading fluctuates form +5 - 5v.

The drivers i am using are a few days old as is the ADC40

I am using the adc10_get_value() method to read from the ADC40.
Oliver Daniell

Postby Michael » Mon Oct 10, 2005 10:50 am

Hello Oliver,

We have recently updated the ADC11 USB drivers which should correct this problem.

Please download them from www.picotech.com/software.html

Best regards,
Michael - Tech Support
Pico Technology
Web Support Forum
Zen Master
Zen Master
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 0 guests