Test and Measurement Forum

Spectrum analysis & software

Which product is right for your exact requirements

Spectrum analysis & software

Postby Gareth Pont » Wed Oct 05, 2005 9:36 am

I need to measure frequency of a low level signal in the range 300kHz to 500kHz with the frquency either displayed numerically or available to process in an automated PC test setup to give a pass/fail result. Currently I use an expensive hardware spectrum analyser with a human interpreter. The spectrum analysis software available for the picoscopes looks very basic and appears to always run from zero up to the maximum selected frequency. Question 1: can the frequency axis be displayed with user selectable start and stop frequencies like a normal hardware analyser? Question 2: Are there marker peak-find functions available with live readout or data-out that can be used in PC ATE?
Gareth Pont

Postby Michael » Mon Oct 10, 2005 9:50 am

Hello Gareth,

Thank you for your post.

The spectrum analysers range is fixed from 0-Max. The measurement outputs can be copied to clipboard and pasted into other applications.

There are a number of options available to you if you wish to write your own software.

Best regards,
Michael - Tech Support
Pico Technology
Web Support Forum
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests