Beta Decoding I2C data/ack in row

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Francis
Newbie
Posts: 0
Joined: Sat Aug 29, 2015 4:46 pm

Beta Decoding I2C data/ack in row

Post by Francis » Sat Aug 29, 2015 4:56 pm

Hello, I use PicoScope 5444B for some time and I am very satisfied. In I2C decoding and PicoScope Beta (6.11.5.1066) the presentation of DATA and ACK has changed and presents data on a single line by Read, in the event of 128 Data read in sequence, it is very difficult in these conditions to observe each DATA-ACK, in my opinion it would be handy to have a presentation in table form like EXA editor, by row of eight data. Or at least be able to choose between the new or the old presentation.
Regards.
Francis

Martyn
Site Admin
Site Admin
Posts: 3333
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Beta Decoding I2C data/ack in row

Post by Martyn » Thu Sep 03, 2015 9:49 am

The Beta software with updated serial decoding is generating plenty of discussions, both positive and negative, which will be used by the development to team to further develop this area of the software in future releases. So thank you for your feedback and comments.
Martyn
Technical Support Manager

Post Reply