Test and Measurement Forum

software to use 6404C for data logging

Post any questions you may have about our current range of oscilloscopes

software to use 6404C for data logging

Postby ronw » Fri Aug 21, 2015 3:39 pm

Is there available software to do continuous data logging with a 6404C scope?

I am doing serial data decoding and only need to save the decoded data - with a time stamp. The raw signal data does not need to be logged.

(I know a data logger would be a better option, but the 6404C is what is available to me.)
Posts: 0
Joined: Wed Aug 19, 2015 3:23 pm

Re: software to use 6404C for data logging

Postby Martyn » Mon Aug 24, 2015 12:07 pm

Serial decoding is handled within the PicoScope 6 software, and will be performed on each collected waveform, and the data can be exported once collected. This would not be continuous data collection, and would require manual intervention.

Exactly what do you mean by continuous data collection, what type of data are you looking at, and over what time period do you wish to collection to run ?
Technical Support Manager
Site Admin
Site Admin
Posts: 3177
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 1 guest