Test and Measurement Forum

Need to enter a file from math scope trace into arb

Post any questions you may have about our current range of oscilloscopes

Need to enter a file from math scope trace into arb

Postby Newtonez » Wed Aug 19, 2015 5:44 pm

I need to enter a file, generated in the math function of scope, as the arbitrary waveform, to be generated at the output BNC of the generator in my scope. I have a PR-3205B bought in January 015. Is this within the normal functioning of the scope? If so, I need step-by-step instructions. If it requires special software, how can I purchase the software?
Newtonez
Newbie
 
Posts: 1
Joined: Thu May 08, 2014 6:53 pm

Re: Need to enter a file from math scope trace into arb

Postby Martyn » Mon Aug 24, 2015 12:14 pm

Yes, this is available in the PicoScope 6 software, at no cost.

Open the Signal Generator dialog, select AWG, which will bring up the waveform editor. Now select "Import from a Channel" on the tool bar (left most button) and then select the maths channel.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2350
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests