Test and Measurement Forum

3000 series composite view

Post any questions you may have about our current range of oscilloscopes

3000 series composite view

Postby jarvissamuel » Thu Sep 22, 2005 1:48 pm

Hello I am currently a 212-3 owner and have found the ability for composite views very helpful. Recently I downloaded the newest software so I could observe a 3423 file sent to me. I set the converter to 3000 series and was able to observe the file. I then tried to merge the file to look at 2 different parts of the trace at the same time and encountered an error message displaying the triggeres were not compatible. I have this error in the past when triggers were different on the 212-3 model but this is the same exact file with the exact same trigger.

I eventually intend to a aquire a 3423 but would really like the file merge/composite view ability to be functional. I did check the file merge option with the new download and the 212-3 it still works normally. If the software team could be informed of this so maybe it can be corrected it would be great.

Thank you for your time.
Posts: 2
Joined: Wed May 18, 2005 5:11 am
Location: Denver Colorado

Postby Michael » Fri Sep 23, 2005 3:56 pm

Thank you for your post.

We will take this into consideration for our next software update.

Best regards,
Michael - Tech Support
Pico Technology
Web Support Forum
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 1 guest