Test and Measurement Forum

Picolog Hardware Detection - 2000 Series

Forum for discussing PicoLog

Picolog Hardware Detection - 2000 Series

Postby wayno3579 » Wed Aug 12, 2015 10:45 pm

Hi,

I have a PicoScope 2206 which runs fine on my Win7 laptop using the Picoscope 6.10.16.2 software.

But it isn't detected by the PicoLog 5.24.8 software.

It shows in the Devices & Printers list in Windows.
I chose PicoScope 2000 Series when I installed the PicoLog software.
I've tried different USB ports.

Is there something more I need to do?

Device = PicoScope 2206
Serial Number = AX766/051

Thanks

Wayne
wayno3579
Newbie
 
Posts: 0
Joined: Wed Aug 12, 2015 10:39 pm

Re: Picolog Hardware Detection - 2000 Series

Postby Martyn » Thu Aug 13, 2015 2:03 pm

The 2206 is one of the newer 2000 series devices, which uses an updated driver model which is not supported in PicoLog.

Please note that you can collect just under 14 hours of data in PicoScope 6 by selecting 5000 s/div, and with the use of the alarms features to save data, you can perform longer term logging.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2339
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to PicoLog

Who is online

Users browsing this forum: No registered users and 0 guests