Running a 6000 series scope off batteries

Post any questions you may have about our current range of oscilloscopes
Post Reply
nickgb
Newbie
Posts: 0
Joined: Tue Oct 04, 2011 1:50 pm

Running a 6000 series scope off batteries

Post by nickgb »

Can anyone recommend a commercial rechargeable battery pack which is suitable for supplying the 6000 series scopes 12V for several hours. We are trying to isolate a problem which may be due to ground borne transients so having a scope which is as far as possible isolated and only grounded at the probe tip may be advantageous.

If relevant the scope is an "original" 6404.

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: Running a 6000 series scope off batteries

Post by Gerry »

Hi nickgb,

I was waiting to see if anyone would reply, because at Pico we're not in the business of randomly endorsing a product, but as they haven't, I can share my experience with you as a consumer, and in no way connected with Pico Technology. The orignal 6404 PicoScopes consume approx 2A with all functionality being used. So, worst case, you need a good battery range up to 'several x 4Ah' to cover your requirement of several hours. I have used this Tracer Range: http://www.tracerpower.com/tracer-lithi ... packs.html for various powering applications, and found them to be excellent on retaining charge when not in use, fast to recharge, truly portable, and ticking pretty much all my other boxes. However, battery power is a fast growing development area, the Tracer range were relatively new and original a few years ago, and there may well be more cost-effective/applicable solutions out there.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply