TC-08 bug

Post any questions you may have about our current range of USB data loggers
Post Reply
jml
Newbie
Posts: 0
Joined: Fri Aug 07, 2015 8:34 am

TC-08 bug

Post by jml » Fri Aug 07, 2015 8:48 am

Hello,
I running the PLW software, all is OK.
After about 30min: all the température are always the same. The del on TC-08 blink normaly.
I'm oblige to close the soft, unplug the usb.
I have the last software.
Do you know what is the problem?

Hitesh
Site Admin
Site Admin
Posts: 2810
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: TC-08 bug

Post by Hitesh » Thu Aug 13, 2015 8:05 am

Hi jml,

Please could you post the corresponding plw data file here or e-mail support@picotech.com and we can investigate further using your settings.

If you record another data file using fresh settings, does it happen again? Are your thermocouples touching any metal surfaces?

You can also save your settings via the File -> Save as... menu option - select the 'Settings files (*.pls)'.

Thanks,
Hitesh

Technical Support Engineer

Post Reply