PicoScope 7 Software
Available on Windows, Mac and Linux
Amplifier for Picscope's signal generator
-
heisenberg2
- Newbie
- Posts: 0
- Joined: Mon Jul 27, 2015 12:57 pm
Amplifier for Picscope's signal generator
Hey all.
I wonder if there is any amplifier for the signal generator of our Pico-Scopes exisiting? The limited voltage range is causing quite a lot of trouble and it should be easy to design an amplifier, to transfer the signal to an external VDD, e.g. 5V or 12V.
However, it still needs some thoughts. E.g. switching frequency, linearity and the right connectors. So before I design one on my own, I would rather like to buy a box ready to use.
Is there anything existing?
Best regards, Heisenberg
I wonder if there is any amplifier for the signal generator of our Pico-Scopes exisiting? The limited voltage range is causing quite a lot of trouble and it should be easy to design an amplifier, to transfer the signal to an external VDD, e.g. 5V or 12V.
However, it still needs some thoughts. E.g. switching frequency, linearity and the right connectors. So before I design one on my own, I would rather like to buy a box ready to use.
Is there anything existing?
Best regards, Heisenberg
Re: Amplifier for Picscope's signal generator
Found something ?As I am as cheap is possible I will build a small LM358 based amplifier because need around 12 volts of amplitude .
L.E.:Built and working AC noninverting LM358 amplifier using info from datasheet
L.E.:Built and working AC noninverting LM358 amplifier using info from datasheet